Browsing 2007 fascicula9 nr2 by Issue Date
Now showing items 1-20 of 28
-
Study on Some Copper-Molybdenum Based Composite Materials Condensed from the Vapour Phase
(Universitatea "Dunărea de Jos" din Galați, 2007)Design features of equipment are given for realizing high-speed process of electron beam evaporation and condensation. Peculiarities of phase composition and structure of a crystallized pool (melt) on copper base are ... -
Some Results of Researches to Develop the Proper Recycling Methods of Technological Residues from Secondary Aluminum Industry
(Universitatea "Dunărea de Jos" din Galați, 2007)The objective of the research is to identify new suitable process to use residual waste (like aluminium secondary dross, salt slag or fly ashes) in concrete products according with sustainable industry concepts. The paper ... -
Study and Researche Regarding Binaring Sistem with TIOBIS - β – NAFTOL
(Universitatea "Dunărea de Jos" din Galați, 2007)This paper presents the results for contribution of determining the manganese from waters and steel. Manganese, due to its properties, cannot be found but in acid waters and usually associated with iron. In small amounts, ... -
Studies Concerning Energetic Consumption of Some Heating Equipments with Resistors
(Universitatea "Dunărea de Jos" din Galați, 2007)In order to increase the resistance of aluminium alloys a complex heat treatment is usually performed. Therefore, we must consider the reaction time between aluminium alloys and furnace atmosphera. These atmospheres ... -
Study of Heat Treatment Influence on Aluminum-Based Alloy ATN-Si10Cu4
(Universitatea "Dunărea de Jos" din Galați, 2007)This work presents the experimental results concerning the behavior on heat treatment of on aluminum based alloy. The laboratory level experiments achieved on samples of ATN-Si10Cu4 (4145 series) alloy illustrate the ... -
Hydrogen production by Steam reforming of Renewable Raw Materials
(Universitatea "Dunărea de Jos" din Galați, 2007)The paper is based on study of steam reforming of renewable raw materials (bioethanol, biomethane) in stainless steel fixed bed reactor. The β-alumina catalysts with nickel has been synthesized and tested supported. The ... -
The Monitoring of Chattering in Cold Rolling Mill System with Stands for Thin Strip
(Universitatea "Dunărea de Jos" din Galați, 2007)Each system (stand – driving) and the continuous rolling line to which it belongs have its own functional and energetically parameters. To reduce any faults of the strip surface it is also necessary to check (eventually ... -
Improvement of Steel Sheet Corrosion Resistance by Thermic Coverage Method with Zinc-Aluminium Alloys
(Universitatea "Dunărea de Jos" din Galați, 2007)The paper presents the main physico-chemical characteristics (viscosity and superficial tension of zinc-aluminium liquid alloy in view of carry out protected layers on steel sheet with very good properties by thermal ... -
The Action of the Ultrasonic Vibration Over the Diffusion Process in Gases and Liquids
(Universitatea "Dunărea de Jos" din Galați, 2007)Among the new method of studying the properties of the substance and the influence over the most various physical and chemical processes, used in different industrial domains, the main place is occupied by the usage of ... -
Semi-Planetary Rolling and Changes of Fine Structure and Microstructure
(Universitatea "Dunărea de Jos" din Galați, 2007)The strain intensity in the proximity of planetary cylinder, in the case of semi-planetary rolling is greater than in the proximity of the massive cylinder. This fact leads at the variation of the microstructure and fine ... -
Basic Mathematical Modeling of the Environmental Processes in the Lower Danube Region [I]
(Universitatea "Dunărea de Jos" din Galați, 2007)In most environmental pollution problems, the pollutant is released to the environment by the, almost always, turbulent flow of a carrier fluid. The pollutant mixes with the surrounding fluid (air or water) and undergoes ... -
Experimental Research Regarding the evolution of Some parameters of the Superficial Layer in love Cycle Fatigue Process
(Universitatea "Dunărea de Jos" din Galați, 2007)The development of some mechanic engineering systems in, feasible to pressure vessels, aeronautics, ship building technology, requires a full investigation of the material features that are to be examined under a low ... -
Experimental Investigation of Fatigue of Thin-Walled Welded Structures of Commercial Vehicle Frames
(Universitatea "Dunărea de Jos" din Galați, 2007)The fatigue behavior of bus frame components consisting of thin-walled tube beams joined together by fillet welding has been investigated. Numerical analysis by means of finite elements and experimental stress analysis ... -
Mechanical Resistance as a Function of Local Properties
(Universitatea "Dunărea de Jos" din Galați, 2007)The present study makes an estimation of an automotive engine piston mechanical properties and fatigue life based on some characteristics of metallurgical microstructure. Because it is intended to assess the properties ... -
Electromagnetic Strip Mills' Driving Rollers Metallisation Advanced Technics
(Universitatea "Dunărea de Jos" din Galați, 2007)The continuous increase of the applications of thermal sprayed coatings together with the demand for layers having always more and more enhanced performances and properties stimulates the research activity toward ... -
Structural and Tribological Aspects on Ti(C,O,N) Magnetron Reactive Sputtered Thin-Films
(Universitatea "Dunărea de Jos" din Galați, 2007)Magnetron sputtering is a flexible technique and allows producing a significant amount of types of coatings. Within the frame of present work, Ti-C-O-N thin films were deposited onto high-speed steel (AISI M2), substrates ... -
Prediction of Buckling and Postbuckling Behaviour of Composite Ship Panels
(Universitatea "Dunărea de Jos" din Galați, 2007)The behavior of ship plating normally depends on a variety of influential factors, namely geometric/material properties, loading characteristics, initial imperfections, boundary conditions and deterioration arising from ... -
Electric and Electromagnetic Properties of Fiber Fabric Based Filled Epoxy Composites
(Universitatea "Dunărea de Jos" din Galați, 2007)Electric and magnetic properties of laminate fiber fabric based epoxy composites are investigated through experimental techniques. Various concentrations of powder fillers were used in order to change the basic properties ... -
The Influence of Cold Rolling on the Microstructure for Drawing Steels
(Universitatea "Dunărea de Jos" din Galați, 2007)The paper presents the structural changes that appeared in steel for deep drawing, as a result of cold rolling and of recrystallization thermal treatment. The research was conducted on samples taken from the rolled strap, ... -
Studies About Electrochemical Plating with Zinc-Nickel Alloys
(Universitatea "Dunărea de Jos" din Galați, 2007)The electrochemical deposition of zinc and combinations with elements of the 8th group of the Periodic System (nickel, cobalt, iron) have good properties for anticorrosive protection, compare with pure zinc. For steel ...