2013 fascicula9 nr4
Envíos recientes
-
Electrodeposition and Characterization of Ni-Si Nanocomposite Coatings
(2013)In this paper is presented morphological aspects and corrosion behaviour of composite coatings having nickel as metal matrix and silicon as dispersed phase obtained during electrodeposition process of nickel. Silicon ... -
Evaluation of the Occupational Risk Associated to Work Environment in Ferrous Metallurgy
(Universitatea "Dunărea de Jos" din Galați, 2013)Work environment present risk factors due to chemical pollution of ambient air with dust, smoke, fumes, vapors, mists and gases. Moreover physical risk factors (related to noise, lighting, temperature, vibration, humidity, ... -
Radial Forging Machine. Technology for Axle Type Parts
(Universitatea "Dunărea de Jos" din Galați, 2013)This paper presents three types of radial forging machines to produce the axle type pieces. The new types of radial forging machines are presented cinematically. The movement of the deformation tools at these types of ... -
Effect of Oxidation on Spectrophotometric and Rheological Parameters of Corn Oil
(Universitatea "Dunărea de Jos" din Galați, 2013)The aim of this study is the viscosity’s evolution depending on the temperature and the shear rate and the analysis of the transmittance spectra of the oxidized corn oil. Corn oil was oxidized of the temperatures of ... -
Optimization of Thermomechanical Processing of Some Aluminum Alloys by Dimensional Interpolation Method Using the Matlab
(Universitatea "Dunărea de Jos" din Galați, 2013)This paper presents results of research on optimization of thermomechanical treatment applied to an alloy of the Al-Zn-Mg-Cu system, used in the aviation industry.Optimizing thermomechanical treatment process is based ... -
Research Concerning the Influence of Laser Cladding on the Operating Charactersitics of the Surface Layers Obtained from High-Speed Steel Powder
(Universitatea "Dunărea de Jos" din Galați, 2013)The paper presents the corrosion behavior of laser cladding layers in 0.5 M NaCl along with a durability test, compared with samples made of clasically hardened HS6-5-2 steel. The higher characteristics of the laser ... -
Research Regarding on Work Safety in Making Steel at LD Converted
(Universitatea "Dunărea de Jos" din Galați, 2013)This paper presents the tasks and work environment of workers working at the LD converter. Risk factors identified and assessed and suitable measures for reducing or eliminating them, resulting a safer environment for ... -
Particular Aspects Concerning Instability at Interface LCAK Steel SLAG (CaO-Al2O3) Due to Transfer of Sulphur, Evaluated Using the Model Reichenbach-Linde Adapteda
(Universitatea "Dunărea de Jos" din Galați, 2013)Based on the model of Reichembach and Linde, adapted to the interface in the system LCAK steel-(CaO-Al2O3) slag at temperature 1873.15K, it is shown that transfer of sulphur from steel to slag could promote interfacial ... -
Research Regarding Work safety in the Loading Zone Furnace
(Universitatea "Dunărea de Jos" din Galați, 2013)The loading zone furnace is the place where we find work belt conveyors, vibrating screens and feeders, 5-ton hoist, cyclone, scale hoppers, troughs for routing and carriage of waste materials. The work consists in ... -
Dust Emissions from an Integrated Steel Mill in Correlation with Human Exposure and their Adverse Health Effects
(Universitatea "Dunăreade Jos" din Galați, 2013)Many of the metallurgical operations contribute to generation of the dust emissions if these are not properly controlled and managed. The relevant sectors as important sources for airborne dust are: coke oven plant, ... -
Composite Based on AIMg Alloys Obtained by Gas Insufflation
(Universitatea "Dunărea de Jos" din Galați, 2013)Composite materials are the most advanced class of materials invented and produced by humans in modern times as well as a challenge for the future in the field of scientific and technological performance. They are made ... -
Static Ananysis of the Structure Type Tank Thermally
(Universitatea "Dunărea de Jos" din Galați, 2013)This paper consider finite element analysis for structural analysis of a tank under thermal loadings. Geometric modeling is done in CATIA and for finite element analysis the author used FEA module in Catia. The aim is ... -
Electrochemical modifications of Titanium and Titanium Alloys Surface for biomedical Applications - A review
(Universitatea 'Dunărea de Jos" din Galați, 2013)The field of biomaterials requires the input of knowledge from very different areas such as biology, medicine and engineering so that the implanted material in a living body to not induce any adverse impacts. The paper ... -
Effect of Current Density on Morphology and Corrosion Resistance of Epoxy Resin/Zn Layers
(Universitatea "Dunărea de Jos" din Galați, 2013)In this research we intended to obtain and characteriz composite layers by using epoxy resin (disperse phase) electrodeposited with zinc (metal matrix). The epoxy resin/Zn layers were electrodeposited at two values of ...