Microstructural Characteristics of Sintered Powder Metallurgy Alloys

dc.contributor.author	Marin, Mihaela
dc.contributor.author	Potecaşu, Florentina
dc.contributor.author	Potecaşu, Octavian
dc.date.accessioned	2018-08-21T08:09:53Z
dc.date.available	2018-08-21T08:09:53Z
dc.date.issued	2014
dc.identifier.issn	1453 – 083X
dc.identifier.uri	http://10.11.10.50/xmlui/handle/123456789/5313
dc.description	The Annals of "Dunarea de Jos" University of Galati Fascicle IX Metallurgy and Materials Science No. 4 – 2014, ISSN 1453 – 083X	ro_RO
dc.description.abstract	The purpose of this paper is to study the influence of processing parameters on the microstructural characteristics of sintered powder metallurgy alloys. The specimens were produced from atomised iron powders with different sizes (<45, 45- 63, 63-100, 100-150, >150 μm). They were compacted at pressures of 600 MPa and sintered for 30 minutes and 120 minutes at 1150 ºC, respectively. The porosity of the sintered samples was analyzed according to their microstructural characteristics and chemical composition.	ro_RO
dc.language.iso	en	ro_RO
dc.publisher	Universitatea "Dunărea de Jos" din Galaţi	ro_RO
dc.subject	powder metallurgy	ro_RO
dc.subject	porosity	ro_RO
dc.subject	sintering	ro_RO
dc.subject	microstructure	ro_RO
dc.title	Microstructural Characteristics of Sintered Powder Metallurgy Alloys	ro_RO
dc.type	Article	ro_RO