Caută
Afișează articolele 1-10 of 33
Improving of Functional Parameters for Pressure Casting Machine with High Degree of Finishing
(Universitatea "Dunărea de Jos" din Galați, 2009)
The paper presents a mathematic model of static and dynamic characteristics
for casting machine. This machine has a hydraulic action for the casting chamber
(her closing and introducing of molten alloy). This action is ...
Characterization of Thick Hard Layers with ni-Cr-B-Fe-Al Alloy Obtained by Laser Cladding
(Universitatea "Dunărea de Jos" din Galați, 2009)
To increase the resistance to wear and corrosion of the surface layers made
from steel with 0.45% C, multilayer deposition was tested by injection of powder
with chemical composition of 8.9% Cr, 4.5% Fe, 5.1% B, 2, 4% ...
Elements of Drawing Theory and Technology of the High Mechanical Strength Wires in Ultrasonic Field
(Universitatea "Dunărea de Jos" din Galați, 2009)
In the paper are presented elements of drawing theory and technology of the
high mechanical strength wires, when the auger die is located in the maximum of the
waves oscillation and it is activated on drawing direction. ...
EDX Analysis of Laser Cladding Layers with Ni-Cr-B-Fe-Al Alloy
(Universitatea "Dunărea de Jos" din Galați, 2009)
Multilayer cladding by injection of powder with 8.9% Cr, 4.5% Fe, 5.1% B,
2.4% Al, 0.6% Cu, Ni rest as chemical composition, in melted bath by a continuous
wave CO2laser connected to x-y-z coordinate table was tested in ...
The Assessing of Mechanical Characteristics of the Steel Sheets Designed for Drawing for a Five-Month-Period as an Effect of Natural Ageing
(Universitatea "Dunărea de Jos" din Galați, 2009)
In the paper it is presented a study run on a five-month-period regarding the
changes in the mechanical characteristics due to natural ageing for a drawing steel,
cold rolled, unalloyed with 0.04% C. The ageing tendency ...
Analysis of Titanium Inteface and Tungsten Exterior layer Thickness Coated by Vibrator Electrode Method
(Universitatea "Dunărea de Jos" din Galați, 2009)
The goal of this paper is to create metallic materials with superior functional
performances. The layer obtained by electrode vibrator method must have a very
good adherence on part surface and a high chemical and thermal ...
Researches Regarding Temperature Influence on Classic and Synthetic Quenching Medium
(Universitatea "Dunărea de Jos" din Galați, 2009)
In this paper were analyzed experimental graphics for quenching cooling
curves of oil at 20°C,40°C,60°C, 80°C and carboxymethyl cellulose (CMC) 1,5%
solution in water at the same temperatures. Velocity cooling was studied ...
Utilisation of Electrochemical Methods for Characterization of Some Corrosion Inhibitors for Steel and Copper
(Universitatea "Dunărea de Jos" din Galați, 2009)
The effect of chromate and molybdate on the corrosion inhibition of copper
and steel has been investigated in two eutectics solution at room temperature. We
used stationary electrochemical methods and optical microscopy ...
Study Regarding Gravimetrical Corrosion of the Superficial Layers Obtained Through Electrical Discharge
(Universitatea "Dunărea de Jos" din Galați, 2009)
The experimental research was made on superficial layers laid-down through
electrical sparking on the steel carbon OLC 45 probes, the used electrode being
made from a corrosion resistant material (Copper).
The probes ...
Heavy Metal Ions Cu (II), Co (II) and Cr (III) bufunctionally Improved with Hydroxamic and Amidoxime Groups Chelating Ion Exchangers
(Universitatea "Dunărea de Jos'' din Galați, 2009)
Two new types of bifunctional chelating ion exchangers on the basis of
ethylacrylate acrylonitrile: divinylbenzene copolymers with hydroxamic acid and
amidoxime groups have been evaluated for Cu(II), Co(II) and Cr(III)ions ...