Influence of the Furnace Temperature in Continuous Flux quenching on the Characteristics of Low Carbin Steel Straps

dc.contributor.author	Drugescu, Elena
dc.contributor.author	Potecașu, Tiberiu
dc.date.accessioned	2018-10-23T08:52:50Z
dc.date.available	2018-10-23T08:52:50Z
dc.date.issued	2007
dc.identifier.issn	1453 – 083X
dc.identifier.uri	http://10.11.10.50/xmlui/handle/123456789/5538
dc.description	The Annals of "Dunarea de Jos" University of Galati Fascicle IX Metallurgy and Materials Science N0. 1 – 2007, ISSN 1453 – 083X	ro_RO
dc.description.abstract	In this paper there are presented mechanical characteristics (resiliency, elongation) and structural characteristics resulted from quenching thermal treatment made on an experimental installation, in continuous flux, on low carbon steel straps (C = 0,185%), cheep, elaborated without special purity prescriptions. The experiments were made varying the furnace temperature while keeping all the other technological parameters constant. The straps’ speed through the system was 2m/min and the cooling was made in water jet. Starting with heating temperatures of 9000C good mechanical characteristics are obtained: Rm 1500 = MPa and A80 = 4%.	ro_RO
dc.language.iso	en	ro_RO
dc.publisher	Universitatea "Dunărea de Jos" din Galați	ro_RO
dc.subject	low carbon steels	ro_RO
dc.subject	quenching	ro_RO
dc.subject	flux thermal treatment	ro_RO
dc.title	Influence of the Furnace Temperature in Continuous Flux quenching on the Characteristics of Low Carbin Steel Straps	ro_RO
dc.type	Article	ro_RO